USA Technologies Indoor Vending Miser with Wall Mount Sensor
USA Technologies Vending Miser is easy to install with no tools needed and offers fully powered equipment while the vending area is occupied and a powered down low energy consumption level when vending area is vacant. The miser is invisible to users and does not compromise cold temperatures needed to maintain vending products. The Vending Miser has been tested by The Coca-Cola Company and The Pepsi-Cola company and has been concluded to have no impact on product quality or on the vending machinery used. Customers never see a powered down machine as the machine life is extended by reducing the number of compressor cycles that are run.
Compatibility: Any machine housing non perishable goods
Diameter (in): 3.25 in.
Frequency: 50/60 Hz
Height: 1.75 in.
Industry Standards: UL/CUL Listed
Input Voltage: 115
Maximum Load: 12A
Occupancy Time Out: 15 minutes
Operating Temperature: -15 to 75 C
Power Consumption: Less than 1W Standby
Relative Humidity: 95 Percent max. (Non-Condensing)
Storage Temperature: -40 to 85C
Weight: 2.2 lbs. w/ power cable
Width: 4.5 in.
Be the first to review our USA Technologies Corporation VM150 Indoor Vending Miser with Wall Mount Sensor