USA Technologies Corporation Easy Install Indoor VendingMiser with Repeater Cable
USA Technologies Vending Miser is easy to install with no tools needed and offers fully powered equipment while the vending area is occupied and a powered down low energy consumption level when vending area is vacant. The miser is invisible to users and does not compromise cold temperatures needed to maintain vending products. The Vending Miser has been tested by The Coca-Cola Company and The Pepsi-Cola company and has been concluded to have no impact on product quality or on the vending machinery used. Customers never see a powered down machine as the machine life is extended by reducing the number of compressor cycles that are run. Repeater cable allows from two to four vending machines (in a row) to be use on unit.
Compatibility: Any machine housing non perishable goods
Diameter (in): 3.25 in.
Frequency: 50/60 Hz
Height: 1.75 in.
Industry Standards: UL/CUL Listed
Input Voltage: 115
Maximum Load: 12A (Steady-State)
Occupancy Time Out: 15 minutes
Operating Temperature: -15 - 75 C
Power Consumption: Less than One Watt/Standby
Relative Humidity: 95 Percent Maximum (Non-Condensing)
Storage Temperature: -40 to 85 C
Weight: 2.2 lbs.
Width: 4.5 in.
No accessories available
Be the first to review our USA Technologies Corporation EZ Install Indoor VendingMiser