Sensor Switch WSD Series White Passive Infrared Programmable Decorator Wall Switch Sensor with Inhibit Photocell
Sensor Switch WSD Series Passive Infrared Wall Switch Decorator Sensor with Inhibit Photocell features patented bi-polar wiring with 2 black wires, small movement detection up to 20 feet, no minimumn load required, time delay from 30 seconds to 20 minutes, green LED indicator, and varied operating temperature of 14 to 85 degrees farenheit. Inhibit operation provides simple prevention of lights from turning on due to adequate daylight. Once the lights are needed due to occupancy AND lack of daylight in an area, the lights will turn on and stay on until the occupancy sensor timer expires. Ideal for public areas like vestibules, corridors and restrooms. Features automatic set point calibration. Made in USA.
Depth: 1.5 in.
Frequency: 60 Hz
Height: 4.2 Inches
Industry Standards: UL and CUL Listed
Mounting Height or Illumination Distance: 30 to 48 Inches
Operating Temperature: 14 to 85 F
Storage Temperature: - 14 to 160 F
Time Delay: 30 sec. Test mode, 20 - 2.5 min. increments permanent setting
Warranty: 5 Years
Width: 1.8 in.
--> GE - 54381 White Single Gang Decor Wall Plate
--> Lutron Electronics Co. - Claro 4-Gang Wallplate White
--> Lutron Electronics Co. - Claro CW-1 White 1-Gang Wall Plate
--> Lutron Electronics Co. - Claro CW-2 White 2-Gang Wallplate
--> Lutron Electronics Co. - Claro White 3-Gang Wallplate
--> Lutron Electronics Co. - Claro White 5-Gang Designer Wallplate
--> Lutron Electronics Co. - Claro White 6-Gang Designer Wallplate
--> GE - White Single Gang Decor Wall Plate
--> Sunlite Lighting - White Single Gang Decor Wallplate
Be the first to review our Sensor Switch Corp. WSD White Passive Infrared Wall Switch Sensor with Photocell