Sensor Switch WSD-SA White Passive Infrared Programmable Semi-Automatic Vacancy Wall Switch Sensor
The WSD-SA (Semi-Automatic) Series is a Passive Infrared Wall Switch Sensor that comes factory set to be Manual On - Auto Off. It is ideal for applications where having a sensor automatically turn on lights is not desired. Instead, a simple press of the button is required to turn the lights on. It is also the ideal solution for situations where the sensor is installed in a location where it can view outside the room. This causes the sensor to trigger when a person walks by the room. The Semi-Automatic feature solves this issue by requiring the button to be pressed to turn on the lights. Besides Manual On operation, several other On Modes and Switch Modes can be programmed into the sensor using the front push-button. For rooms with obstructions the WSD-PDT-SA should be considered.
Depth: 1.5 in.
Frequency: 60 Hz
Height: 4.2 in.
Industry Standards: UL and CUL Listed
Mounting Height or Illumination Distance: 30 to 48 Inches
Operating Temperature: 14 to 85 F
Storage Temperature: - 14 to 160 F
Time Delay: 10 min. ON no activity, programmable 30 sec. to 20 min.
Warranty: 5 Years
Width: 1.8 in.
--> Lutron Electronics Co. - Claro 4-Gang Wallplate White
--> Lutron Electronics Co. - Claro CW-1 White 1-Gang Wall Plate
--> Lutron Electronics Co. - Claro CW-2 White 2-Gang Wallplate
--> Lutron Electronics Co. - Claro White 3-Gang Wallplate
--> Lutron Electronics Co. - Claro White 5-Gang Designer Wallplate
--> Lutron Electronics Co. - Claro White 6-Gang Designer Wallplate
--> Sunlite Lighting - White Single Gang Decor Wallplate
Submit a review of our Sensor Switch Corp. WSD-SA White Passive Infrared Wall Switch Semi-Automatic Vacancy Sensor
Posted by Robert | 06/20/2010
This is the first and only motion switch that I have found that will work with CFL bulbs. The other motion sensor switches available at Home Depot and Lowes (GE Brand) will not work with CFL (lights will flicker).