Philips Color Kinetics Data Enabler DMX or Ethernet

Color Kinetics Data Enabler DMX or Ethernet
*Image Accuracy Not Guaranteed

Product Name: Color Kinetics Data Enabler DMX or Ethernet

Product #: 106-000003-04

Manufacturer: Philips

Unit of Measure: Each (1)

Quantity of Units/Case: 1

Minimum Quantity of Cases to Order: 1

We are sorry, but this item has been discontinued.

Color Kinetics Data Enabler is a data formatting device specifically designed for Color Kinetics fixtures, featuring Powercore digital power processing technology. Data Enabler data drivers condition data supplied Ethernet or DMX512 controllers, including Color Kinetics full line of controllers, to a format compatible with the fixtures. The integration of power and data simplifies wiring installations, and the selection of control configurations expands the versatility of theapplications. Data Enabler automatically accommodates a universal supply voltage ranging 100 to 240 volts AC, 50/60 Hz the maximum connected load does not exceed 20 Amps. The input and outputline voltage connections are made to terminal blocks. Data Enabler is available for either DMX, for use with Color Kinetics controllers or third-party DMX512 controllers; or Ethernet, for use with ColorKinetics Light System Manager.

Connector Type: Power In: 3-wire terminal block connector; Out: 4-wire terminal block

Height: 3.2 in.

Housing: NEMA 4

Industry Standards: UL/CUL Dry, damp, wet

Length: 9.7 in.

Voltage: 100-240

Watts: 10

Width: 3.5 in.

Be the first to review our Philips Color Kinetics Data Enabler DMX or Ethernet