Philips Color Kinetics Data Enabler
Color Kinetics Data Enabler is a data formatting device specifically designed for Color Kinetics fixtures, featuring Powercore digital power processing technology. Data Enabler data drivers condition data supplied from Ethernet or DMX512 controllers, including Color Kinetics full line of controllers, to a format compatible with the fixtures. The integration of power and data simplifies wiring installations, and the selection of control configurations expands the versatility of theapplications. Data Enabler automatically accommodates a universal supply voltage ranging from 100 to 240 volts AC, 50/60 Hz where the maximum connected load does not exceed 20 Amps. The input and outputline voltage connections are made to terminal blocks. Data Enabler is available for either DMX, for use with Color Kinetics controllers or third-party DMX512 controllers; or Ethernet, for use with ColorKinetics Light System Manager.
Connector Type: Power In: 3-wire terminal block connector; Out: 4-wire terminal block
Height: 3.2 in.
Housing: NEMA 4
Industry Standards: UL/CUL Dry, damp, wet
Length: 9.7 in.
Width: 3.5 in.
--> Philips - ColorBlast Powercore Black 50W LED Fixture, 10 Degree
--> Philips - ColorBlast Powercore Black 50W LED Fixture, 23 Degree
--> Philips - ColorBlast Powercore White 50W LED Fixture, 10 Degree
--> Philips - ColorBlast Powercore White 50W LED Fixture, 23 Degree
--> Philips - iColor Cove MX Powercore 12W RGB LED 12 in. Linear Fixture, Narrow Beam
--> Philips - iColor Cove MX Powercore 40 ft. Leader Cable
Be the first to review our Philips Color Kinetics Data Enabler