Gripple 5 ft. No. 1 Toggle Hanger, 1/4 in. Hole
A restraining toggle plate and end stop fitted at one end of the wire rope allows the Hanger to be easily fitted into pre-drilled or pressed holes in metal sheeting, or in units such as luminaries and other cavities. Each size has been designed to fit a specific hole size. The toggle end can be used as a support from above or below.
Diameter (in): 1/4 in.
Industry Standards: UL 1598, 2239; SMACNA
Length: 5 ft.
Load: 0-22 lbs.
Material: AISI 316 Zinc Galvanized (cable)
Mounting Height: Cable with end stop and toggle plate
Be the first to review our Gripple Inc. 5 ft. No. 1 Toggle Hanger