USA Technologies CoolerMiser with Repeater Cable

Product Info

USA Technologies cooler miser controls glass front coolers that contain non perishable goods and have sliding or pull open doors. Cooler Miser can stand alone or it can be used with the Vending Miser as well. Cooler Miser uses a passive infrared sensor to determine occupancy in the area of the cooler. The miser features quick and easy installation and constant power when the machine is being used. Keeping coolers powered off when they are not in use protects them from damaging powerline spikes ensuring a long machine life. Cooler Miser is made in the USA.

Specifications

Auto Repower: 1-7 hours, dynamically adjusted, based on cooler performance and ambient temp.

Compatibility: Slide Coolers containing non-perishible goods not exceeding 12 amp nameplate rating

Diameter d (in): 3.25 Inches

Frequency: 50/60 Hz

Industry Standards: UL, CUL Listed

Input Voltage: 115 Volts

Length: 1.75 Inches

Maximum Load: 12 Amps (Steady State)

Occupancy Time Out: 15 Minutes

Operating Temperature: -15 to 75 C

Power Consumption: Less than 1 Watt (Standby)

Relative Humidity: 95 Percent Maximum (Non-Condensing)

Storage Temperature: -40 to 85 C

Weight: 2.2 lbs. (with power cable)

Width: 4.5 Inches

Accessories

--> USA Technologies Corporation - EZ Install Indoor Vending Miser and Sensor
--> USA Technologies Corporation - VM2iQ Energy Management System

Review

Be the first to review our USA Technologies Corporation EZ Install CoolerMiser